Created : 30 Jan 2024
Last Update : 26 Apr 2024
Camera installation for Zebra ZT610
Camera installation: step by step visual guide for installation1. Mount the camera assembly using existing screws
2. Mount the electronics enclosure to the inside of the printer upstand
3. Run cabling to the IoT Device and plug into the USB port
4. Mount the encoder assembly and fix to the printer using the existing mounting plate.
5. Adjust so that the pulley teeth are in contact with the drive belt
6. Plug in USB-A to USB-B (printer port) cable
7. Upgrade firmware to ZT610 (see https://kb.perceptor-cloud.com/zebra-guides/zebra-firmware/ for upgrade guide)
8. If running in peel and present or internal rewind, mount the sensor bracket or rewinder plate
